HDPE GEOSTRAP PRODUCTION LINE

HDPE GEOSTRAP PRODUCTION LINE

SATURN2905024

 

HDPE GEOSTRAP PRODUCTION LINE

 

  1. Detailed configuration:

 

  1. Feeding system

Feeding motor power: 0.75 KW

 

2.STG-250 dryer

Raw materials: PP particles or crushed materials

Output: 100 kg/h

Drying tower volume: 250L

Heating power of drying tower: 16KW

Drying fan: 250W

 

PP-HJ90/28 single screw extruder

1) Rack

It is welded with section steel and has high rigidity.

2) Gearbox

① Reduction ratio: I=16:1

② Input power: 25KW

③ Hardened surface grinding gear

3) Barrel and screw

① Material: 38CrMoA1A

② Nitriding depth: 0.3 ～ 0.6mm, nitriding hardness: 740 HV

③ Surface roughness of screw rib: 0.4 μ m

④ Length diameter ratio: 28:1

⑤ Inner surface roughness of barrel: 0.8 μ m

4) Heating coil

① 4 sets of cast aluminum heaters

② Heater power supply: 220V, 50HZ, 2.5 KW/group

5) Main motor

① Motor power: 25 KW

② Power supply: 3~AC 380V 50HZ

③ Speed: 1500 rpm

6) Head flange

 

 

① Forged steel 45 # finished

② Surface chrome plating

7) Electric cabinet

① Frequency converter

② Temperature control area: 6 groups

③ Independent control cabinet

  1. Head mold

 

  1. Water tank cooling system

 

Structure and composition of water tank

1) Frame and box

2) Lifting roller assembly

3) Temperature control system

 

4) Liquid level control system (adjust the water level)

5) Dewatering platform

  • Frame and box

 

It is welded with section steel and has high rigidity. All mounting surfaces are machined to ensure installation accuracy. The tank body is made of stainless steel, 3.5 m long, 5 m wide and 1.2 m high

Ensure that PP is fully cooled and crystallized rapidly after extrusion from the die head.

  • Lifting roller assembly

 

Six groups of upgradable transition stainless steel pipes are set to facilitate the adjustment of the depth of water brought into the PP grid strip and the width of the geogrid strip.

  • Temperature control system

 

A heating system is set, which can be set at a certain temperature to keep it constant.

  • Liquid level control system (adjust the water level)

 

The water level can be adjusted and installed at the water inlet and outlet of the water pipe.

  • Dewatering platform

 

  1. Traction roller
    • Traction motor power: 1.1KW

 

2) Diameter of traction roller: Φ 140 mm

3) Number of rollers: 3

4) Frame A3 machining

5) Frequency conversion control

  1. Stretching and setting oven

 

1) Length: 4000 mm

2) Double layer, with insulation layer inside

3) Heating power: 12 KW,

4) Length of shaped water tank: 4000mm

  1. Stretching roller

 

 

1) Traction motor power: 3KW

2) Roller diameter Φ 140 mm

3) Number of rollers: 3

4) Frame A3 machining

6) Frequency conversion control

 

  1. Embossing tractor

A/ stretching & embossing

1) Embossing roll diameter: Φ 90mm

2) Frame A3 machining

B/ haul off unit

1) Traction motor power: 1.1KW

2) Diameter of cooling roll: Φ 120mm

3) Clamping assembly

4) Frame A3 machining

  1. Double station winder

 

1) Winding diameter: 250 mm X 190 mm

2) DC coiling motor: 1HP

III. User provided

1) Water source (tap water or deep well water), water connection pipe, booster pump.

2) Air source (0-0.8mpa) and gas connection pipeline.

3) Power distribution cabinet.

4) Water and electrical pipes and accessories other than equipment.

 

Related Offers